Steps for Attaching Snowboard Bindings

Before hitting the slopes with your snowboard, ensure your bindings are properly attached. This concise guide will demonstrate how to affix snowboard bindings onto your board. It's a relatively simple task and, provided you have your kit and a Phillips screwdriver, you'll be ready for action. Remember, snowboard binding systems vary by model, and this video specifically addresses the traditional or classic system, which requires bindings to be screwed onto the board:

1. Position the binding onto your board with the buckles facing outwards, then open it.
2. Lift the base rubber pad to reveal the mounting area.
3. Insert the mounting disc within the binding.
4. The current angle is indicated by a small arrow on the binding.
5. Rotate the disc to your chosen angle and press it down into place.
6. Align the binding using the markings on the board for the advised position.
7. With a large Phillips head screwdriver, fasten the screws in a crisscross pattern.
8. Secure the bindings and repeat these actions for the other binding.

The bindings are now successfully attached!