Tear it up with the Undercover 8mm wheel spacer, ideal for aggressive skates
Crafted by Undercover, this spacer is designed for aggressive inline skate wheel assemblies but is also suitable for skateboards, cruiser boards, and longboards.
Technical Features:
Constructed from aluminium
Dimensions: 8mm internal diameter with a width of 10.8mm
Rick CasarrubiasBad Fischau-Brunn, AustriaVerified Buyer5 of 5Perfect size for skateboarding wheels.Chris ChBinsfeld, GermanyVerified Buyer3 of 5Are ok for skates if you can grind them down like about 1mm. Otherwise they are too wide for inlines. Never the less, I could make them work and rollin great with themReply from SkateProHey,
Thank you for your feedback and the tip about grinding!
I can see, that we have accidentally sent you a wrong spacer in your order. I hope the replacement worked better and meets your expectations. :) // SarahPascal C. c. A. K.Viry, FranceVerified Buyer5 of 5Fast and accurate service.A. AlblasEde, NetherlandsVerified Buyer1 of 5Although I bought these spacers to use for wheels from Undercover they turned out to be almost a millimeter too long. This pushed the bearings out of the wheels resulting in wobbly wheels. To solve this I spent a long time sanding the spacers until they were the right length and the problem was largely solved. If the spacers had been the right length this would not have been necessary and would have saved me a lot of time. Hence the low rating of this product.Reply from SkateProHi Alexander! We have already had contact back and forth and fortunately the problem has now been solved. For the undercover wheels you need these spacers: https://www.skatepro.nl/391-21102.htm Enuff Skateboard Wheel Spacer 8mm. This has been tested in the warehouse and it fits. :) //IrisAleksandar PalicWien, Favoriten, AustriaVerified Buyer2 of 5Good spacers in themselves, but 0.5-1mm too thick for inline and therefore unusable... I don't understand why they are listed in the inline category...Nicola GiovanniniLucca, ItalyVerified Buyer5 of 5Aluminum spacer, all rightDavid Van HammeMaldegem, BelgiumVerified Buyer5 of 5I bought these to solve the problem that when I tightened the bolts on my kizer hardware all the way, the bearings were under lateral stress and wouldn't spin freely. These are wider and solved the problem. They are actually a bit too wide, the bearings now only insert 95% but that doesn't cause problems and you can grind them down to taste if you like.Igor GaasbeekGent, BelgiumVerified Buyer2 of 5Deze spacers waren iets langer dan mijn normale spacers en ik heb ze uiteindelijk dus niet gebruikt. Ik zou kiezen voor een ander model!A. KalkowskiEkne, Norway5 of 5Greie spaceraS. GaetanoLiège, Belgium5 of 5Bon rapport qualité prix
Rien à dire
