Guide to Fitting a BMX Chain

For any BMX enthusiast, fitting a BMX chain may pose a significant maintenance challenge. If you find yourself unsure about the process, take a look at our video for guidance:

1. Firstly, insert the rear wheel and secure it by hand.
2. Next, loop the chain around the sprocket and rear cogs.
3. Identify where the chain links overlap, and use a chain breaker to separate the chain.
4. Rejoin the chain at this point, again employing the chain breaker.
5. Then, place the chain loosely on the gears and pull the wheel backwards until the chain is tight.
6. Finally, fasten the rear wheel from both ends.

The installation of your chain is now complete!