Guide to Fitting Bearings in Roller Skates

This video demonstrates how to fit bearings into roller skate wheels. With just a skate tool, you'll be ready to start!

Instructions for Installing Roller Skate Bearings:

Begin by unscrewing the nut from the axle using a skate tool.
Place 2 bearings onto the axle.
Position the wheel onto the axle with the external side facing downwards. Utilise both hands to press it down completely, ensuring the first bearing is set into the wheel.
Take off the wheel and place the spacer onto the axle.
Next, turn the wheel and press it down again to guarantee the second bearing is properly inserted.

Your bearings are now ready!

Frequently Asked Questions:

Is it possible to use skateboard bearings in roller skates?

Indeed, skateboard bearings are compatible with roller skates. However, ensure that the wheel axles of your roller skates have a diameter of 8 mm!

What is the method for removing bearings from roller skate wheels?

A bearing remover tool or the wheel axle of your roller skates can be employed.

How many bearings are required for roller skates?

A total of 16 bearings are needed for a pair of roller skates (2 per wheel).

Are spacers necessary in roller skates?

If your roller skates are used for leisure or dancing, and you can tighten your wheels adequately without restricting the bearings, spacers are optional. However, if you engage in intensive roller skating or if tightening your roller skate wheels causes them to seize, spacers are essential.