Base Kit Prep Ski Glide Wax

A comprehensive glider kit for your cross-country skis.

Included:
Combi Brush
Graphite Glider (suitable for all temperatures)
Glider (suitable for cleaning and saturation)
Scraper
Pencil Groove Scraper

1) Prepare the base structure: Apply the combi brush in the glider areas with 2-3 strokes.

2) Cleaning used skis (New skis: Proceed to step 3): Use an iron (sold separately) to heat up the glider in the glide areas. After the glider wax has dried, but remains warm, utilise the scraper to remove the glider. Follow with 2-3 strokes of the combi brush in the glide areas.

3) Apply two layers of glider wax using an iron. Begin with one layer and allow the ski to cool down. Then, take the following actions:

a) Use the pencil groove scraper to clear the base middle guide
b) Remove the glide wax from the remainder of the base with the scraper
c) Apply the combi brush with 2-3 strokes in the glider areas
d) Now, add the second layer and let the skis cool down before repeating the above actions once more.

4) Introduce an abrasion-resistant layer: Warm in a layer of graphite with an iron in the glider zones to create a more durable abrasion-resistant layer. Allow the skis to cool down and proceed as follows:

a) Clear the middle base guide with the pencil groove scraper
b) Remove the rest from the base using the scraper
c) Use the combi brush, striking approximately 15 times, until the base appears shiny.